“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “2/2-CARTRIDGE VALVE
FOR HYDRAULIC VALVE PRESSURE BLOCK 32P-HA WINDLASS WINCH VALVE
TYPE: LOHY4040
PART NO.: A6679586
DRAWING NO.: 8200996
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6679586
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “2/2-CARTRIDGE VALVE
FOR HYDRAULIC VALVE PRESSURE BLOCK 25P-HA – MOORING WINCH VALVE
TYPE: LOHY3044
PART NO.: A6679585
DRAWING NO.: 8201004
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6679585
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “4/2 VALVE
TYPE: SUDE0652
PART NO.: A6679581
FOR 2-SPEED VALVE MOORING AND WINDLASS WINCH VALVE
DRAWING NO.: 8200999 AND 8201012
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6679581
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “BALL VALVE
FOR WINDLASS AND MOORING WINCHES
PART NO.: A6750033
DRAWING NO.: 8400882
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6750033
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “BALL VALVE FOR WINDLASS
PART NO.: 6755118
DRAWING NO. 8400877
DIMENSION: REEFER TO PHOTO
MAX PRESSURE: 315 BAR
MAX TESTING PRESSURE VALVE OPEN POSITION: 473 BAR
WG: 10KG” ROLLS-ROYCE.NA.6755118
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “BALL VALVE FOR MOORING
PART NO.: 6755117
DRAWING NO. 8400876
DIMENSION: REEFER TO PHOTO
MAX PRESSURE: 315 BAR
MAX TESTING PRESSURE VALVE OPEN POSITION: 473 BAR
WG: 8KG” ROLLS-ROYCE.NA.6755117
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “CHECK VALVE
FOR BASE BLOCK F324R&L AND F2530 WINDLASS AND MOORING WINCH VALVE 32P/25P
TYPE: VAHA0003
PART NO.: A6580084
DRAWING NO.: 8301464 AND 8301465
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6580084
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “COUNTER BALANCE VALVE
TYPE: 29506200
SPARE CODEE: A6679547
FOR BASE BLOCK F2530 MOORING WINCH VALVE
DRAWING NO.: 8301468
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6679547
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “COUNTER BALANCE VALVE
TYPE: KLSU0606
PART NO.: A6580124
FOR 2-SPEED VALVE MOORING AND WINDLASS WINCH VALVE
DRAWING NO.: 8200999 AND 8201012
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6580124
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “COUNTER BALANCE VALVE 2 PC’S
FOR BASE BLOCK F324R & F324L WINDLASS WINCH VALVE 32P
TYPE: 29506400
SPARE CODEE: A6679548
DRAWING NO.: 8301464 AND 8301465
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6679548
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “PRESSURE REDUCING VALVE
FOR WINDLASS AND MOORING WINCHES
PART NO.: A6709047
DRAWING NO.: 8400882
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6709047
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “PRESSURE RELIEF VALVE
FOR BASE BLOCK F324L & F324R WINDLASS WINCHES VALVE 32P
TYPE: PRSU1601
SPARE CODEE: A6679587
PS=250 BAR
DRAWING NO.: 8301464
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6679587
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “PRESSURE RELIEF VALVE
FOR BASE BLOCK F324L & F324R WINDLASS WINCHES VALVE 32P
TYPE: PRSU1601
SPARE CODEE: A6679587
PS=250 BAR
DRAWING NO.: 8301464
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6679587
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “PRESSURE RELIEF VALVE
FOR BASE BLOCK F324L & F324R WINDLASS WINCHES VALVE 32P
TYPE: PRSU1609
SPARE CODEE: A6679588
PS=300 BAR
DRAWING NO.: 8301465
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6679588
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “PRESSURE RELIEF VALVE
TYPE: PRSU1607
SPARE CODEE: A6679589
FOR BASE BLOCK F2530 MOORING WINCH VALVE
DRAWING NO.: 8301468
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6679589
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “PRESSURE TEST POINT
R1/4” – M16X2
FOR WINDLASS AND MOORING WINCHES
PART NO.: A6639211
DRAWING NO.: 8400882
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6639211
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “PRESSURE VALVE
FOR HYDRAULIC VALVE PRESSURE BLOCK 32P-HA & 25P-HA MOORING AND WINDLASS WINCH VALVE
TYPE: 39564400
PART NO.: A8301469-0-000
DRAWING NO.: 8200996 & 8201004
REEFER TO PHOTO” ROLLS-ROYCE.NA.A8301469-0-000
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “REMOTE CONTROL VALVE
FOR AFT PORT MOORINH REMOTE CONTROL STAND RCS23-0
DRAWING NO.: A8301560
PART NO.: 6604380
REEFER TO PHOTO” ROLLS-ROYCE.NA.6604380
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” “SHUTTLE VALVE
FOR HYDRAULIC VALVE PRESSURE BLOCK 32P-HA & 25P-HA MOORING AND WINDLASS WINCH VALVE
TYPE: VVCO0400
PART NO.: A6679584
DRAWING NO.: 8200996 & 8201004
REEFER TO PHOTO” ROLLS-ROYCE.NA.A6679584
“MAKER: ROLLS-ROYES
RAUMA BRATTVAAG (ROLLS-ROYES MARINE)
HYDRAULIC DECK AMCHINERY MWHA 200 / CU 90 U3
PREPARED FOR HYUNDAI HEAVY INDUSTRIES CO., LTD. (PROJECT NO.: H1818)” MAGNETIC CONTACTOR, LC1D50A, COIL VOLTAGE 220VAC, MAKER SCHNEIDER ELECTRIC ROLLS-ROYCE.NA.NA
080442J-ROLLS
Key Features
Technical Specifications
Iterm One
Iterm two
Iterm There
Iterm Four
Case Study
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Brazilian Miner Vale SA
23 large-scale ball mills, Ø5.5×8.8m
Wengfu Phosphate Mine Project Phase II in Saudi Arabia (Ma'aden)
6 wet grinding rod mills, Ø4.6×6.7m
Vedanta Project in South Africa
1 SAG mill, Ø8.5×5.5m
Laos Phonesack Group's KSO Gold Mine Project (83,000t/d)
6 SAG mills, Ø8.8×4.8m
Mongolian Erdenet Mining Corporation's Copper Mine Project (20,000t/d)
SAG mill, Ø9.75×4.88m
Full-process Solution for Mineral Grinding
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Why Choose CITIC HIC's Grinding Mills
- High cost-effectiveness
CITIC HIC grinding mills are recognized as China’s Manufacturing Industry Single Champion Product. CITIC HIC is responsible for setting the national standards of semi-autogenous mills (SAG mills) and ball mils, supported by powerful database, optimized process technology, cutting-edge design concept, and 60 years of experience in developing and nurturing innovative technology. - High operating rate
The long life cycle of our products is based on the adoption of international standards, high-quality materials, state-of-the-art processing techniques. - Low-carbon & environmental-friendly processes
Intelligent control technology coupled with long-life wear-resistant materials results in low-carbon and eco-friendly operations. - High-efficiency service
Our service network is distributed all over the world, and our service team of seasoned professionals is reliable and willing to assist along the way. We are able to deliver quick response to customer needs and provide full life cycle support via online monitoring and diagnosing, product upgrading and continuous process improvement.
