“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” RELAY VALVE (5) DAIHATSU.DK-20.E212850050
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” THRUST COLLAR (BEARING SIDE) DAIHATSU.DK-20.10-2
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” DISTANCE PIECE DAIHATSU.DK-20.10-3
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” THRUST COLLAR COMPRESSOR SIDE DAIHATSU.DK-20.10-4
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” SEALING BUSH DAIHATSU.DK-20.10-5
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” SHAFT END HEXAGON NUT DAIHATSU.DK-20.10-6
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” SEAL RING DAIHATSU.DK-20.10-7
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” SEAL PLATE(COMPRESSOR SIDE) DAIHATSU.DK-20.40-1
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” SEAL PLATE (BEARING SIDE) DAIHATSU.DK-20.40-2
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” BEARING BUSH DAIHATSU.DK-20.50-2
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” SNAP RING DAIHATSU.DK-20.50-3
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” O-RING DAIHATSU.DK-20.50-6
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” FLOATING JOURNAL BEARING DAIHATSU.DK-20.60-1
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” THRUST BEARING DAIHATSU.DK-20.60-2
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” SPECIAL PLUG DAIHATSU.DK-20.X572310000DZ
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” GUIDE, NOZZLE HOLDER DAIHATSU.DK-20.E205650100
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” CONTROL SLEEVE DAIHATSU.DK-20.E206452650
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” STUD DAIHATSU.DK-20.X210016072ZZ
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” O RING DAIHATSU.DK-20.E206452850
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” PISTON PIN BUSH DAIHATSU.DK-20.E205250040
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” SNAP RING DAIHATSU.DK-20.Z412004800ZZ
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” INDICATOR & SAFETY VALVE (1) ASSY DAIHATSU.DK-20.E206959610
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” PUSH ROD DAIHATSU.DK-20.E206650080
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” SPRING;PLUNGER DAIHATSU.DK-20.E206452450
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” STUD DAIHATSU.DK-20.E205650130
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” “AIR STARTER MOTOR
MAKER : INGERSOLL RAND.
MODEL :ST499ICO3L32
MAX INLET PRESSURE:90 PSIG” DAIHATSU.DK-20.E212850040
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” Exhaust Valve Seat (12/Unit) DAIHATSU.DK-20.E205650090
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” O-Ring (12/Unit) DAIHATSU.DK-20.E205650260
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” O-Ring (12/Unit) DAIHATSU.DK-20.E205650270
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” Gasket (12/Unit) DAIHATSU.DK-20.Z565003400ZZ
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” DEFLECTOR DAIHATSU.DK-20.E206452150
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” SPECIAL STRAIGHT PIN DAIHATSU.DK-20.E205250080
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” RUBBER SEAL PUSH ROD DAIHATSU.DK-20.E206650140
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” D.V. ASSY DAIHATSU.DK-20.E206452240
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” CONNECTING ROD ASSEMBLY DAIHATSU.DK-20.901
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” WIRE 1.8X200 DAIHATSU.DK-20.Z321018020DZ
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” O RING DAIHATSU.DK-20.E205650300
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” VALVE SPRING (OUTER) DAIHATSU.DK-20.E205750150
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” VALVE SPRING (INNER) DAIHATSU.DK-20.E205750140
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” T. VALVE YOKE DAIHATSU.DK-20.E205950030
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” INTAKE VALVE DAIHATSU.DK-20.E205750050
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” ROD CONNECTING BOLT DAIHATSU.DK-20.E205250070
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” CRANKPIN BEARING SHELL DAIHATSU.DK-20.E205250010
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” PLUNGER ASSY, 21 DAIHATSU.DK-20.E206452120
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” EXHUST VALVE -1 DAIHATSU.DK-20.E205850040
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” VALVE COTTER 9 DAIHATSU.DK-20.E205750090
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” STRAIGHT PIN DAIHATSU.DK-20.Z335006016ZZ
“FOR AUXILIARY ENGINE #3
MAKER:DAIHATSU DIESEL MFG LTD.
4-STROKE DIESEL GENERARTOR, MODEL NO. 5DK-20 (560 Kw)” DIFFUSER DAIHATSU.DK-20.35-1
111564W-DK20
Key Features
Technical Specifications
Iterm One
Iterm two
Iterm There
Iterm Four
Case Study
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Brazilian Miner Vale SA
23 large-scale ball mills, Ø5.5×8.8m
Wengfu Phosphate Mine Project Phase II in Saudi Arabia (Ma'aden)
6 wet grinding rod mills, Ø4.6×6.7m
Vedanta Project in South Africa
1 SAG mill, Ø8.5×5.5m
Laos Phonesack Group's KSO Gold Mine Project (83,000t/d)
6 SAG mills, Ø8.8×4.8m
Mongolian Erdenet Mining Corporation's Copper Mine Project (20,000t/d)
SAG mill, Ø9.75×4.88m
Full-process Solution for Mineral Grinding
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Why Choose CITIC HIC's Grinding Mills
- High cost-effectiveness
CITIC HIC grinding mills are recognized as China’s Manufacturing Industry Single Champion Product. CITIC HIC is responsible for setting the national standards of semi-autogenous mills (SAG mills) and ball mils, supported by powerful database, optimized process technology, cutting-edge design concept, and 60 years of experience in developing and nurturing innovative technology. - High operating rate
The long life cycle of our products is based on the adoption of international standards, high-quality materials, state-of-the-art processing techniques. - Low-carbon & environmental-friendly processes
Intelligent control technology coupled with long-life wear-resistant materials results in low-carbon and eco-friendly operations. - High-efficiency service
Our service network is distributed all over the world, and our service team of seasoned professionals is reliable and willing to assist along the way. We are able to deliver quick response to customer needs and provide full life cycle support via online monitoring and diagnosing, product upgrading and continuous process improvement.
