“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Lube oil pressure pump) EMD.R12-645E7.8261166
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Pump ASM. Scavenging and fuel oil pump) With flanged fuel pump connections. EMD.R12-645E7.8417754
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Scavenging and fuel oil pump) EMD.R12-645E7.8210019
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Pump ASM. Fuel oil – Flanged connections 3.6 G.P.M EMD.R12-645E7.8410219
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolt. Hex head 1/2- 20×4 housing to crankcase) EMD.R12-645E7.181446
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolt. Hex head 1/2-20×2 housing to crankcase) EMD.R12-645E7.181435
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolt. Hex head 1/2-20×1-3/4 housing to crankcase) EMD.R12-645E7.181433
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolt. Hex head 1/2-20×1-5/8) EMD.R12-645E7.181432
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Washer. Flat 1/2) EMD.R12-645E7.6101229
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolt. Turbocharger mounting 1/2 -20x 1-1/4 hex head. EMD.R12-645E7.181429
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolt. Hex head 1/2-20×1-3/4 housing to crankcase) EMD.R12-645E7.181433
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolt. Hex head-drilled1/2-20×1 housing to crankcase) EMD.R12-645E7.8407428
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Sleeve. Water manifolds) EMD.R12-645E7.8433263
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Washer plain 3/8) EMD.R12-645E7.6101225
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolt. Turbocharger mounting 1/2 -20x 1-1/4 hex head. EMD.R12-645E7.181429
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Washer. Flat 1/2) EMD.R12-645E7.6101229
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolt. Turbocharger to camshaft housing 3/4 -16×11-5/16 hex head. EMD.R12-645E7.8261288
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Washer. Hardened 3/4 EMD.R12-645E7.8140912
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Nut. Lock 1/4-28 hex) EMD.R12-645E7.8032715
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolt. Shoulder 1/4-28×1-5/8 hex head .370 shoulder) EMD.R12-645E7.8059643
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bearings. Shell upper half) EMD.R12-645E7.8071176
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bearing. Shell lower half) EMD.R12-645E7.8239700
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bearing. Shell lower half) EMD.R12-645E7.8239700
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bearings. Shell upper half) Camshaft drive end EMD.R12-645E7.8253825
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bearings. Shell upper half) Camshaft drive end EMD.R12-645E7.8253825
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Screw. Socket head cap. ½- 13×2 – Formerly 8253973 EMD.R12-645E7.138294
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Pump ASM. Piston cooling and pressure EMD.R12-645E7.8084556
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Seal. Oil) EMD.R12-645E7.8028752
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Retainer assembly. Oil seal) EMD.R12-645E7.8070619
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Snap ring) EMD.R12-645E7.8054053
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Shim) EMD.R12-645E7.8061581
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Spacer) EMD.R12-645E7.8054047
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Overspeed trip housing) EMD.R12-645E7.8564698
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Camshaft drive housing) EMD.R12-645E7.8368758
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Lube oil suction strainer element) EMD.R12-645E7.8496989
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Collar. Thrust oversize) EMD.R12-645E7.8146108
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Power pack assembly blade) EMD GENUINE OEM EMD.R12-645E7.40115910
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Power pack assembly fork) EMD GENUINE OEM EMD.R12-645E7.40115909
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bearing. Upper connecting rod) EMD.R12-645E7.8354118
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bearings. Lower connecting rod) EMD.R12-645E7.8136114
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bearings. Lower connecting rod) EMD.R12-645E7.8136114
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Arm ASM. Rocker arm exhaust valve) EMD.R12-645E7.8328694
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Lube oil separator) EMD.R12-645E7.8306360
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Fuel manifold- With flange connections) EMD.R12-645E7.9564571
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Accessories drive housing) EMD.R12-645E7.8261173
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Governor drive) EMD.R12-645E7.8336989
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Power assembly installation) EMD.R12-645E7.9317971
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Cylinder head cover and support frame) EMD.R12-645E7.8271651
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” ((Seal. Water manifolds insert 3.370 in. dia) EMD.R12-645E7.8433272
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Seal. Water manifolds insert 3.557 in. dia) EMD.R12-645E7.8347415
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Arm ASM. Rocker injector) EMD.R12-645E7.8456128
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Shaft. Rocker arm) EMD.R12-645E7.8028460
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket) EMD.R12-645E7.8029167
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Injectors Assembly UTEX) EMD.R12-645E7.8478046
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Exhaust valve bridge ASM. UTEX) EMD.R12-645E7.8361504
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bearings. Shell upper half) EMD.R12-645E7.8071176
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (upper main bearing standard) contain all the upper main bearings. EMD.R12-645E7.8455081
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Kit. Lower main bearings standard) Contain all the lower bearings. EMD.R12-645E7.8455083
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Fly wheel indicator) EMD.R12-645E7.8377432
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Left bank) EMD.R12-645E7.8269638
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Right bank) EMD.R12-645E7.8269664
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Water pump) EMD.R12-645E7.8368757
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Crankcase pressure detector ASM) EMD.R12-645E7.8362040
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Turbocharger) EMD.R12-645E7.9515699
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. Turbocharger changeout) EMD.R12-645E7.8414907
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (After cooler assembly) EMD.R12-645E7.8409891
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket kit. After cooler changeout) EMD.R12-645E7.8372925
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bolts. After cooler mounting 3/8-24×1-3/4 hex head) EMD.R12-645E7.1864891
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” Crankshaft Main Bearings – 12 -645 Engine EMD.R12-645E7.NA
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Bearing. Ball) EMD.R12-645E7.908085
“MAKER:EMD
TYPE:R12-645E7
SER NO:78F-1024” (Gasket. Retainer) EMD.R12-645E7.8070521
0301147T-EMD
Key Features
Technical Specifications
Iterm One
Iterm two
Iterm There
Iterm Four
Case Study
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Brazilian Miner Vale SA
23 large-scale ball mills, Ø5.5×8.8m
Wengfu Phosphate Mine Project Phase II in Saudi Arabia (Ma'aden)
6 wet grinding rod mills, Ø4.6×6.7m
Vedanta Project in South Africa
1 SAG mill, Ø8.5×5.5m
Laos Phonesack Group's KSO Gold Mine Project (83,000t/d)
6 SAG mills, Ø8.8×4.8m
Mongolian Erdenet Mining Corporation's Copper Mine Project (20,000t/d)
SAG mill, Ø9.75×4.88m
Full-process Solution for Mineral Grinding
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Why Choose CITIC HIC's Grinding Mills
- High cost-effectiveness
CITIC HIC grinding mills are recognized as China’s Manufacturing Industry Single Champion Product. CITIC HIC is responsible for setting the national standards of semi-autogenous mills (SAG mills) and ball mils, supported by powerful database, optimized process technology, cutting-edge design concept, and 60 years of experience in developing and nurturing innovative technology. - High operating rate
The long life cycle of our products is based on the adoption of international standards, high-quality materials, state-of-the-art processing techniques. - Low-carbon & environmental-friendly processes
Intelligent control technology coupled with long-life wear-resistant materials results in low-carbon and eco-friendly operations. - High-efficiency service
Our service network is distributed all over the world, and our service team of seasoned professionals is reliable and willing to assist along the way. We are able to deliver quick response to customer needs and provide full life cycle support via online monitoring and diagnosing, product upgrading and continuous process improvement.
