Eq. Section Serial NumberO-RING, CYL. LINER 147644-01300, Maker: Yanmar, PartNo: 147644-01300, Spec: Drawing:747644-01120 Cylinder liner
AE1 Cylinder liners
YANMAR.M220AL-UN.147644-01300
gasket, cyl. head 147644-01350, Maker: Yanmar, PartNo: 147644-01350, Spec: Drawing:747644-01120 Cylinder liner
AE1 Cylinder liners
YANMAR.M220AL-UN.147644-01350
Cylinder liner 147644-01120, Maker: Yanmar, PartNo: 147644-01120, Spec: Drawing:747644-01120 Cylinder liner
AE1 Cylinder liners
YANMAR.M220AL-UN.147644-01120
O-ring, cyl. liner 147644-01320, Maker: Yanmar, PartNo: 147644-01320, Spec: Drawing:747644-01120 Cylinder liner
AE1 Cylinder liners
YANMAR.M220AL-UN.147644-01320
PACKING 139654-33120, Maker: Yanmar, PartNo: 139654-33120, Spec: Drawing:738653-33011 LO Cooler
AE1 Lub. oil cooler
P200-12 L=1800
YANMAR.M220AL-UN.738653-33011PACKING -33 23414-330000, Maker: Yanmar, PartNo: 23414-330000, Spec: Drawing:747644-11020 cylinder head
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.23414-330000SPRING (A), VALVE 137678-11120, Maker: Yanmar, PartNo: 137678-11120, Spec: Drawing:747644-11020 Cylinder head
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.137678-11120
SPRING (B), VALVE 137678-11130, Maker: Yanmar, PartNo: 137678-11130, Spec: Drawing:747644-11020 Cylinder head
AE1 Cylinder covers w/valvesSEAL, MECHANICAL 137610-42492, Maker: Yanmar, PartNo: 137610-42492, Spec: Drawing:747644-42300 Water cooling pump CCLKW
AE1 Auxiliary HT F.W. Pump
YANMAR.M220AL-UN.137610-42492
HEAD ASSY, CYLINDER, Maker: Yanmar, PartNo: 747644-11780-C
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.747644-11780-C
O-ring, Maker: Yanmar, PartNo: 150673-11800
Main generator diesel engine PS
684 kW, 1000 rpm,
Crankshaft marked: V W 28978 (Received: 01.06.2014 – Skagen).
All main journals and crankpins are grounded 0.40 mm under size:
– main journals: 179.60 mm
– crankpin journals: 169.60 mm
– thrust bearing ring – standard size.
Thrust bearing place and flange are faced.
YANMAR.M220AL-UN.150673-11800
O-RING, Maker: Yanmar, PartNo: 150673-11810
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.150673-11810
SPRING, Maker: Yanmar, PartNo: 27323-160620
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.27323-160620
Spring, Maker: Yanmar, PartNo: 27325-160620
Main generator diesel engine PSgasket t=0.8, Maker: Yanmar, PartNo: 147644-01340
AE1 Cylinder liners
YANMAR.M220AL-UN.147644-01340
gasket t=1.2, Maker: Yanmar, PartNo: 147644-01360
AE1 Cylinder liners
YANMAR.M220AL-UN.147644-01360
PACKING, Maker: Yanmar, PartNo: 134673-12110
AE1 Suction manifold
YANMAR.M220AL-UN.134673-12110
PACKING, Maker: Yanmar, PartNo: 150623-13201
AE1 Exhaust manifold
YANMAR.M220AL-UN.150623-13201
Bellows joint exh, Maker: Yanmar, PartNo: 141616-13710
Main generator diesel engine PS
684 kW, 1000 rpm,
Crankshaft marked: V W 28978 (Received: 01.06.2014 – Skagen).
All main journals and crankpins are grounded 0.40 mm under size:
– main journals: 179.60 mm
– crankpin journals: 169.60 mmMETAL COMP.U.0.4, Maker: Yanmar, PartNo: 147644-23310
AE1 Pistons with connecting rods
YANMAR.M220AL-UN.147644-23310
JOURNAL BEARING COMP, Maker: Yanmar, PartNo: 147644-02870
AE1 Bedplates, frames
YANMAR.M220AL-UN.147644-02870
GASKET 43400-003760, Maker: Yanmar, PartNo: 43400-003760, Spec: Drawing:747644-11020 cylinder head
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.43400-003760
O-ring, Maker: Yanmar, PartNo: 24316-000390
Main generator diesel engine PSVALVE, EXHAUST 150673-11112, Maker: Yanmar, PartNo: 150673-11112, Spec: Drawing:747644-11020 cylinder head
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.150673-11112
GASKET 43400-003760, Maker: Yanmar, PartNo: 43400-003760, Spec: Drawing:747644-11020 cylinder head
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.43400-003760
SEAT, VALVE 150673-11091, Maker: Yanmar, PartNo: 150673-11091, Spec: Drawing:747644-11020 Cylinder head
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.150673-11091
VALVE, SUCTION 150623-11101, Maker: Yanmar, PartNo: 150623-11101, Spec: Drawing:747644-11020 Cylinder head
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.150623-11101
684 kW, 1000 rpm,
Crankshaft marked: V W 28978 (Received: 01.06.2014 – Skagen).
All main journals and crankpins are grounded 0.40 mm under size:
– main journals: 179.60 mm
– crankpin journals: 169.60 mm
– thrust bearing ring – standard size.
Thrust bearing place and flange are faced.
YANMAR.M220AL-UN.24316-000390
PACKING, Maker: Yanmar, PartNo: 139654-33120
AE1 Lub. oil cooler
P200-12 L=1800
YANMAR.M220AL-UN.139654-33120
O-ring, Maker: Yanmar, PartNo: 24321-002000
Main generator diesel engine PS
684 kW, 1000 rpm,
Crankshaft marked: V W 28978 (Received: 01.06.2014 – Skagen).
All main journals and crankpins are grounded 0.40 mm under size:
– main journals: 179.60 mm
– crankpin journals: 169.60 mm
– thrust bearing ring – standard size.
Thrust bearing place and flange are faced.
YANMAR.M220AL-UN.24321-002000
SEAL, VALVE STEM, Maker: Yanmar, PartNo: 136600-11581
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.136600-11581
– thrust bearing ring – standard size.
Thrust bearing place and flange are faced.
YANMAR.M220AL-UN.141616-13710
PACKING, Maker: Yanmar, PartNo: 139654-13220
AE1 Exhaust manifold
YANMAR.M220AL-UN.139654-13220
PISTON (FCD), Maker: Yanmar, PartNo: 147644-22020-C
AE1 Pistons with connecting rods
YANMAR.M220AL-UN.147644-22020-C
Piston pin, Maker: Yanmar, PartNo: 147644-22300
Main generator diesel engine PS
684 kW, 1000 rpm,
Crankshaft marked: V W 28978 (Received: 01.06.2014 – Skagen).
All main journals and crankpins are grounded 0.40 mm under size:
– main journals: 179.60 mm
– crankpin journals: 169.60 mm
– thrust bearing ring – standard size.
Thrust bearing place and flange are faced.
YANMAR.M220AL-UN.147644-22300
Circlip, Maker: Yanmar, PartNo: 22252-000900
Main generator diesel engine PS
684 kW, 1000 rpm,
Crankshaft marked: V W 28978 (Received: 01.06.2014 – Skagen).
All main journals and crankpins are grounded 0.40 mm under size:
– main journals: 179.60 mm
– crankpin journals: 169.60 mm
– thrust bearing ring – standard size.
Thrust bearing place and flange are faced.
684 kW, 1000 rpm,
Crankshaft marked: V W 28978 (Received: 01.06.2014 – Skagen).
All main journals and crankpins are grounded 0.40 mm under size:
– main journals: 179.60 mm
– crankpin journals: 169.60 mm
– thrust bearing ring – standard size.
Thrust bearing place and flange are faced.
YANMAR.M220AL-UN.22252-000900
WASHER, Maker: Yanmar, PartNo: 141616-23270
AE1 Pistons with connecting rods
YANMAR.M220AL-UN.141616-23270
684 kW, 1000 rpm,
Crankshaft marked: V W 28978 (Received: 01.06.2014 – Skagen).
All main journals and crankpins are grounded 0.40 mm under size:
– main journals: 179.60 mm
– crankpin journals: 169.60 mm
– thrust bearing ring – standard size.
Thrust bearing place and flange are faced.
YANMAR.M220AL-UN.27325-160620
BALL, Maker: Yanmar, PartNo: 27326-210760
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.27326-210760
GASKET 43400-003760, Maker: Yanmar, PartNo: 43400-003760, Spec: Drawing:747644-11020 cylinder head
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.43400-003760
GASKET, Maker: Yanmar, PartNo: 147644-11290
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.147644-11290
PACKING, Maker: Yanmar, PartNo: 123210-01810
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.123210-01810
O-RING 1A P-20.0, Maker: Yanmar, PartNo: 24311-000200
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.24311-000200
O-RING 4D P-22A, Maker: Yanmar, PartNo: 24316-350220
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.24316-350220
YANMAR.M220AL-UN.137678-11130
GUIDE, VALVE 147644-11180, Maker: Yanmar, PartNo: 147644-11180, Spec: Drawing:747644-11020 Cylinder head
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.147644-11180
GUIDE, VALVE 147644-11150, Maker: Yanmar, PartNo: 147644-11150, Spec: Drawing:747644-11020 Cylinder head
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.147644-11150
SEAT, VALVE, Maker: Yanmar, PartNo: 147644-11080
AE1 Cylinder covers w/valves
YANMAR.M220AL-UN.147644-11080
O-RING 141616-51220, Maker: Yanmar, PartNo: 141616-51220, Spec: Drawing:747644-51100 Fuel injection pump
AE1 HP Fuel pumps
YANMAR.M220AL-UN.141616-51220
O-RING 1A G-40.0 24321-000400, Maker: Yanmar, PartNo: 24321-000400, Spec: Drawing:747644-54010 Bracket FO injection pump mtg.
AE1 HP Fuel pumps
YANMAR.M220AL-UN.24321-000400
O-RING 4D P-39.0 24316-000390, Maker: Yanmar, PartNo: 24316-000390, Spec: Drawing:747644-51100 Fuel injection pump
AE1 HP Fuel pumps
YANMAR.M220AL-UN.747644-51100
O-RING 1A P-14.0 24311-000140, Maker: Yanmar, PartNo: 24311-000140, Spec: Drawing:747644-54010 Bracket FO injection pump mtg.
AE1 HP Fuel pumps
YANMAR.M220AL-UN.24311-000140
O-RING 1A G-70.0 24321-000700, Maker: Yanmar, PartNo: 24321-000700, Spec: Drawing:747644-54010 Bracket FO injection pump mtg.
AE1 HP Fuel pumps
YANMAR.M220AL-UN.24321-000700
1556 FTN/1556 FTE
Eq. Section Department Type
M220 AL-UN
RING SET, PISTON 747644-22500, Maker: Yanmar, PartNo: 747644-22500, Spec: Drawing:747644-22010/23010 Piston
AE1 Pistons with connecting rods
YANMAR.M220AL-UN.747644-22500
032010Y-MAV-050-2023
Key Features
Technical Specifications
Iterm One
Iterm two
Iterm There
Iterm Four
Case Study
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Brazilian Miner Vale SA
23 large-scale ball mills, Ø5.5×8.8m
Wengfu Phosphate Mine Project Phase II in Saudi Arabia (Ma'aden)
6 wet grinding rod mills, Ø4.6×6.7m
Vedanta Project in South Africa
1 SAG mill, Ø8.5×5.5m
Laos Phonesack Group's KSO Gold Mine Project (83,000t/d)
6 SAG mills, Ø8.8×4.8m
Mongolian Erdenet Mining Corporation's Copper Mine Project (20,000t/d)
SAG mill, Ø9.75×4.88m
Full-process Solution for Mineral Grinding
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Why Choose CITIC HIC's Grinding Mills
- High cost-effectiveness
CITIC HIC grinding mills are recognized as China’s Manufacturing Industry Single Champion Product. CITIC HIC is responsible for setting the national standards of semi-autogenous mills (SAG mills) and ball mils, supported by powerful database, optimized process technology, cutting-edge design concept, and 60 years of experience in developing and nurturing innovative technology. - High operating rate
The long life cycle of our products is based on the adoption of international standards, high-quality materials, state-of-the-art processing techniques. - Low-carbon & environmental-friendly processes
Intelligent control technology coupled with long-life wear-resistant materials results in low-carbon and eco-friendly operations. - High-efficiency service
Our service network is distributed all over the world, and our service team of seasoned professionals is reliable and willing to assist along the way. We are able to deliver quick response to customer needs and provide full life cycle support via online monitoring and diagnosing, product upgrading and continuous process improvement.
