“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A15000 903
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A15000 932
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A15000 901
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A15000 922
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A15000 923
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A52300 116
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A52300 117
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Sealing ring HYUNDAI HIMSEN.6H21/32.A19300 384
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Sealing ring HYUNDAI HIMSEN.6H21/32.A19300 388
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Fuel injection valve body HYUNDAI HIMSEN.6H21/32.A52000 001
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A52000 004
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Atomizer assembly HYUNDAI HIMSEN.6H21/32.A52000 012
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Fuel oil inlet branch pipe HYUNDAI HIMSEN.6H21/32.A53000 105
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A53000 119
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Connector diam.10 x PF1/4 HYUNDAI HIMSEN.6H21/32.A53000 152
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Stud for con-rod big end HYUNDAI HIMSEN.6H21/32.A32000 191
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Nut HYUNDAI HIMSEN.6H21/32.A32000 192
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Stud for con-rod shaft HYUNDAI HIMSEN.6H21/32.A32000 194
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Compression ring – top HYUNDAI HIMSEN.6H21/32.A31100 151
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Compression ring – 2nd HYUNDAI HIMSEN.6H21/32.A31100 152
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Oil scrapper ring HYUNDAI HIMSEN.6H21/32.A31100 153
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Inlet valve spindle HYUNDAI HIMSEN.6H21/32.A21200 201
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Exhaust valve spindle HYUNDAI HIMSEN.6H21/32.A21200 202
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Roto cap HYUNDAI HIMSEN.6H21/32.A21200 204
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Valve insert – inlet HYUNDAI HIMSEN.6H21/32.A21100 111
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Valve insert – exhaust HYUNDAI HIMSEN.6H21/32.A21100 112
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Valve guide HYUNDAI HIMSEN.6H21/32.A21100 113
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A21100 291
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” O-ring HYUNDAI HIMSEN.6H21/32.A21100 903
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Gasket for compressor outlet HYUNDAI HIMSEN.6H21/32.A81000 111
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Gasket for connection flange HYUNDAI HIMSEN.6H21/32.A82000 287
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” AVR assembly 6GA2 491-1A HYUNDAI HIMSEN.6H21/32.3M-049407
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Pick-up for Turbocharger rpm (0-60000 rpm), T/C maker HYUNDAI HIMSEN.6H21/32.SE42
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Safety pick-up for Engine rpm (0-1200 rpm), Drw. N. B13-141987-4.2 HYUNDAI HIMSEN.6H21/32.SSH 47-1
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Pressure transmitter for FO inlet, 0-16 kg/cm3, 4`20 mA, Drw.B99-007880-6.0 HYUNDAI HIMSEN.6H21/32.PT 51
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Temperature transmitter with amplifier for exhaust gas TC inlet, 0-600°C, 4`20 mA, Drw.B99-001359-1.1 HYUNDAI HIMSEN.6H21/32.TE26A
“MAKER:HYUNDAI HIMSEN
TYPE:6H21/32
TURBOCHARGER MAKER: KBB, MODEL: HPR4000, SER N.913/08” Temperature transmitter with amplifier for exhaust gas each cyl. outlet, 0-600°C, 4`20 mA, Drw.B99-007287-1.0 HYUNDAI HIMSEN.6H21/32.TE25 1 CYL
042735T-AF-E-019
Key Features
Technical Specifications
Iterm One
Iterm two
Iterm There
Iterm Four
Case Study
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Brazilian Miner Vale SA
23 large-scale ball mills, Ø5.5×8.8m
Wengfu Phosphate Mine Project Phase II in Saudi Arabia (Ma'aden)
6 wet grinding rod mills, Ø4.6×6.7m
Vedanta Project in South Africa
1 SAG mill, Ø8.5×5.5m
Laos Phonesack Group's KSO Gold Mine Project (83,000t/d)
6 SAG mills, Ø8.8×4.8m
Mongolian Erdenet Mining Corporation's Copper Mine Project (20,000t/d)
SAG mill, Ø9.75×4.88m
Full-process Solution for Mineral Grinding
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Why Choose CITIC HIC's Grinding Mills
- High cost-effectiveness
CITIC HIC grinding mills are recognized as China’s Manufacturing Industry Single Champion Product. CITIC HIC is responsible for setting the national standards of semi-autogenous mills (SAG mills) and ball mils, supported by powerful database, optimized process technology, cutting-edge design concept, and 60 years of experience in developing and nurturing innovative technology. - High operating rate
The long life cycle of our products is based on the adoption of international standards, high-quality materials, state-of-the-art processing techniques. - Low-carbon & environmental-friendly processes
Intelligent control technology coupled with long-life wear-resistant materials results in low-carbon and eco-friendly operations. - High-efficiency service
Our service network is distributed all over the world, and our service team of seasoned professionals is reliable and willing to assist along the way. We are able to deliver quick response to customer needs and provide full life cycle support via online monitoring and diagnosing, product upgrading and continuous process improvement.
