“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” FUEL PUMP PLUNGER & BARREL DAIHATSU.DK-20.NA
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING DAIHATSU.DK-20.506/Z560203031DZ
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” EXHAUST MANIFOLD(FRONT T/C;TPS48,MET 18) CH.3/26.3 [MD-02-67]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” EXHAUST MANIFOLD GASKET DAIHATSU.DK-20.27/E202150270
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” FUEL PUMP PLUNGER & BARREL DAIHATSU.DK-20.NA
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” “A/E DAIHATSU 5DK-20 – (CB2/CB6) [MD-01]
Particulars :
Maker : DAI HAN / Serial No : [DK520Z1944] [DK520Z1945] [DK520Z1946]
Subsystem: SPARES – ENGINE SIDE COVER CH.3/2.1 [MD-02-25]”
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” SIDE COVER GASKET (4) DAIHATSU.DK-20.15/E200350150
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” CAM GEAR COVER GASKET DAIHATSU.DK-20.17/E200350170
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” SIDE COVER GASKET (7) DAIHATSU.DK-20.19/E200350190
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING DAIHATSU.DK-20.24/E200350240
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” CRANKSHAFT & MAIN BEARING CH.3/7.2 [MD-02-38]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” MAIN BEARING SHELL DAIHATSU.DK-20.B1/E200750010
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” THRUST BEARING DAIHATSU.DK-20.B5/E200750050
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” CYLINDER LINER CH.3/10 [MD-02-40]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” CYLINDER LINER DAIHATSU.DK-20.901/4/E205050040
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING DAIHATSU.DK-20.901/501/Z560223057Z
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” PROTECT RING DAIHATSU.DK-20.901/7/E205050070
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING DAIHATSU.DK-20.901/9/E205050090
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” PISTON CH.3/11 [MD-02-41]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” PISTON-6 DAIHATSU.DK-20.25/E205150250
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” SNAP RING, C-TYPE DAIHATSU.DK-20.35/E205150350
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” CONNECTING ROD CH.3/12 [MD-02-42]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” CRANKPING BEARING SHELL 5 5 0 DAIHATSU.DK-20.1/E205250010
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” CONNECTING ROD DAIHATSU.DK-20.10/E205250100
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” CRANKPIN BOLT DAIHATSU.DK-20.6/E205250060
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” “A/E DAIHATSU 5DK-20 – (CB2/CB6) [MD-01]
Particulars :
Maker : DAI HAN / Serial No : [DK520Z1944] [DK520Z1945] [DK520Z1946]
Subsystem: SPARES – CONNECTING ROD CH.3/12 [MD-02-42]”
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” ROD CONNECTING BOLT DAIHATSU.DK-20.7/E205250070
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” CYLINDER HEAD (NOZZLE:NON-COOLING TYPE) CH.3/13.2 [MD-02-44]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE GUIDE 2 DAIHATSU.DK-20.A102/E205655010
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE STEM SEAL 1 DAIHATSU.DK-20.A103/U205605010
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” GUIDE, NOZZLE HOLDER-C DAIHATSU.DK-20.A11/E205650110
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING(FLUDRO) DAIHATSU.DK-20.A30/E205650300
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE STEM SEAL DAIHATSU.DK-20.A32/E205650320
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE STEM SEAL DAIHATSU.DK-20.A32/E205650320
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” SNAP RING DAIHATSU.DK-20.A506/Z412004800ZZ
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” GASKET, C.W. CONNECTOR DAIHATSU.DK-20.A56/E205650560
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” SEAT, EXHAUST VALVE (METCO_ DAIHATSU.DK-20.A9/E205650090
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” GASKET, INTAKE MANIFOLD BEND DAIHATSU.DK-20.B7/E202050070
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” EXHAUST VALVE CH.3/14 [MD-02-45]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE ROTATOR DAIHATSU.DK-20.901/12/E2057250120
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE SPRING (INNER) DAIHATSU.DK-20.901/14/E205750140
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE SPRING (OUTER) DAIHATSU.DK-20.901/15/E205750150
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” EXHAUST VALVE-1 DAIHATSU.DK-20.901/4/E205850040
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” SEAT, VALVE SPRING DAIHATSU.DK-20.901/7/E205750070
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE COTTER DAIHATSU.DK-20.901/9/E205750090
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” INTAKE VALVE CH.3/15 [MD-02-46]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE ROTATOR DAIHATSU.DK-20.901/12/E205750120
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE SPRING (INNER) DAIHATSU.DK-20.901/14/E205750140
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE SPRING (OUTER) DAIHATSU.DK-20.901/15/E205750150
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE -2 DAIHATSU.DK-20.901/5/E205750050
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” SEAT, VALVE SPRING DAIHATSU.DK-20.901/7/E205750070
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE COTTER DAIHATSU.DK-20.901/9/E205750090
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” VALVE OPERATING DEVICE CH.3/17 [MD-02-48]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING DAIHATSU.DK-20.512/Z560101424ZZ
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” CYLINDER HEAD COVER CH.3/18 [MD-02-49]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” RUBBER SEAL, HEAD COVER DAIHATSU.DK-20.A10/E206350100
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” INTAKE & EXHAUST TAPPET CH3/19 [MD-02-50]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” RUBBER SEAL, PUSH ROD DAIHATSU.DK-20.14/E206650140
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” PUSH ROD DAIHATSU.DK-20.8/E206650080
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” FUEL OIL INJECTION PUMP CH.3/20.2 [MD-02-52]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” DEFLECTOR DAIHATSU.DK-20.215/AE01064007
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING DAIHATSU.DK-20.216/E206452160
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” D.V. ASSY. DAIHATSU.DK-20.224/E206452240
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” “A/E DAIHATSU 5DK-20 – (CB2/CB6) [MD-01]
Particulars :
Maker : DAI HAN / Serial No : [DK520Z1944] [DK520Z1945] [DK520Z1946]
Subsystem: SPARES – FUEL OIL INJECTION PUMP CH.3/20.2 [MD-02-52]”
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING DAIHATSU.DK-20.230/E206452300
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING DAIHATSU.DK-20.236/E206452360
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” GASKET DAIHATSU.DK-20.261/E206452610
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” GASKET DAIHATSU.DK-20.280/E206452800
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” GASKET DAIHATSU.DK-20.280/E206452800
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” FUEL OIL INJECTION BLOCK CH.3/21.1.1 [MD-02-53]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING DAIHATSU.DK-20.505/Z560103235DZ
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” GASKET DAIHATSU.DK-20.507/Z565001920ZZ
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” FUEL OIL INJECTION BLOCK CH.3/21.1.2 [MD-02-54]
“FOR A/E
MAKER:DAIHATSU
TYPE:5DK-20” O-RING DAIHATSU.DK-20.12/E206250120
051237S-CB2-S235231
Key Features
Technical Specifications
Iterm One
Iterm two
Iterm There
Iterm Four
Case Study
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Brazilian Miner Vale SA
23 large-scale ball mills, Ø5.5×8.8m
Wengfu Phosphate Mine Project Phase II in Saudi Arabia (Ma'aden)
6 wet grinding rod mills, Ø4.6×6.7m
Vedanta Project in South Africa
1 SAG mill, Ø8.5×5.5m
Laos Phonesack Group's KSO Gold Mine Project (83,000t/d)
6 SAG mills, Ø8.8×4.8m
Mongolian Erdenet Mining Corporation's Copper Mine Project (20,000t/d)
SAG mill, Ø9.75×4.88m
Full-process Solution for Mineral Grinding
We believe the projects that we have executed speak for themselves. CITIC HIC has engineered and provided 6 AG mills of Ø12.2m×11m (28000kW gearless drive) and 6 overflow discharge ball mills of Ø7.9×13.6m (2×9000kW gear drive) for Sino Iron Project in Australia. For Zijin Mining’s Duobaoshan Copper Mine project in Heilongjiang, we have manufactured and provided SAG mills of Ø11×6.4m (2×9000kW) and overflow discharge ball mills of Ø7.9×13.6m (2×9000kW) which have been well operating currently.
Why Choose CITIC HIC's Grinding Mills
- High cost-effectiveness
CITIC HIC grinding mills are recognized as China’s Manufacturing Industry Single Champion Product. CITIC HIC is responsible for setting the national standards of semi-autogenous mills (SAG mills) and ball mils, supported by powerful database, optimized process technology, cutting-edge design concept, and 60 years of experience in developing and nurturing innovative technology. - High operating rate
The long life cycle of our products is based on the adoption of international standards, high-quality materials, state-of-the-art processing techniques. - Low-carbon & environmental-friendly processes
Intelligent control technology coupled with long-life wear-resistant materials results in low-carbon and eco-friendly operations. - High-efficiency service
Our service network is distributed all over the world, and our service team of seasoned professionals is reliable and willing to assist along the way. We are able to deliver quick response to customer needs and provide full life cycle support via online monitoring and diagnosing, product upgrading and continuous process improvement.
